On The One Music

Wireless deadman series trigger reversal industrial remote controls are specifically manufactured for industrial automation that requiring positive operator to machine contact. A wireless trigger device is utilized to send RF control signals to the pump. Now the operator is unencumbered by cables and wires normally used in deadman fueling operations.

The Wireless radio remote mastery and system that incorporates a secure frequency hopping, spread-spectrum radio link that is practically protected to outside electrical or RF interference. Operations fail safe (shutdown) with any loss of signal from wireless transmitter. The rechargeable transmitter device that supplies 30hrs of nonstop uses between the charges with 12/24VDC charger supplied. There are some specifications of wireless deadman series spark rearrange industrial remote controls.

* The asylum timer software is available to limit switch closure duration prior to automatic shut-off.
* The feature requires periodic start pulse by operator to maintain receiver ‘on’ condition and this is necessary.
* This is up to eleven other command functions that available per customer requirements.
* Now the modular quick-connect components licit for easy installation and garden service.
* And the Pre-wired solenoids are available for Pneumatic, Hydraulic, or Hose Reel control interface.

There are different examples of additional of control button options that are given below:

The hose reel option that allows remote control system greatly reducing effort required to pull the hose off the reel. At the same time the potential venomous is reduced and productivity is increased through easier hose handling.

The system is really moderate to install et alii use that prewired hose swim car solenoids and 70Amp breaker included with this option. The manner design prevents Unwind and Rewind circuits from being energized.

Now the PTO uncertainty PUMP option that extends pump life plus increases safety by allowing operator to engage et cetera disengage the PTO and PUMP from hose end at customer’s storage tank.

In addition, the truck PTO shaft is not revolving, pump is not running in by-pass, and hose is not charged unless associated to the client’s tank. The PTO association vessel be electric, pneumatic, “hot shift” or “clutch shift”.

Nowadays, outlying PTO delay options automatically opens tank internal valve 5 seconds prior to engaging PTO allowing pump et sequens product lines to equalize pressure. This feature prevents an excess flow ‘slug’ situation which when occur that starves the pump of product, and may lead to inject failure.

The system has some transmitter specifications;

The frequency engagement is 902-928 MHz FHSS (433.92 MHz, 869.7 MHz & 2.4GHz radios available). The transmitter power is nominal 100MW. And the method of transmission is 56bit DES encryption key. The system has internal on card PCB mount of Antenna.

This is invisible so that it will not treffen damage. The normal range of this remote control is raise to 500 feet. The paradigm constructed with rugged weatherproof polymer enclosure. And the temperature specification is minus 20F to 185F connective that is really extensive.

The battery life of this transmitter specification is up 30hours of continuous uses with audible low brigade warning et al flashing LED indicator.